Kawasaki Z 1000

Artikel: Kawasaki Z750/1000 Framesliders
type: Z 1000
prijs: € 34.95
kleur: zilver
Staat: nieuw
soort: Overige
Frame Sliders Defender for Z750/1000 '03-'06 [DEF0403] van € 75,00 voor € 34,95 Voor montage van deze slides hoeft niet geboord te worden. Anders dan op de afbeelding, worden de stangen niet in het zwart geleve4rd maar in alu, de doppen zijn wel zwart. MAXIMUM LIGHTNESS: thanks to the innovative raw materials wrought by numerical control machines. MAXIMUM SAFETY: the plug obtained from a single block of special plastic with low friction coefficient allows the motorbike to stop gradually during the fall reducing the risk of a roll over. All the fixing bolts are made of high-tensile steel. MAXIMUM SAVING: in case of fall You will only need to replace the plastic plug. With a very low cost Your frame slider will be as new. INNOVATIVE AESTHETIC QUALITY: we have studied a new design that matches the frame sliders with the line of the new motorbikes, sports and naked ones. In addition each part has been treated with an anodizing process which prevents the attack of atmospheric agents, preserving them forever as if they were new. The plug has been screen printed by laser. SCREW PREVENTION SYSTEM: the only ones that have a system which prevents the loss of the plug during the driving. MAXIMUM DISASSEMBLY PRACTICALNESS: it is sufficient to screw the plug with Your bare hands, without using utensils. ASSEMBLING INSTRUCTIONS: - both right both left sliders are identical, - dismantle the bolt that holds the frame and the engine in the forepart (next to the manifolds). Pay attention and don't lose the lock nut that is behind the engine (is better to do this operation when the engine is cold), - unscrew the derlyn plug and by using a 8mm allen key fix the slider in place of the original bolt, reusing the original lock nut. (we suggest to follow the instructions of the manufacturer for the tighten), - screw the plug on the slider with vim, - do the same for other slider. We suggest to avoid to remove the second bolt until the first slider is fixed, because the engine will come down. Rarely is necessary to replace the original lock nut. We reccomend the use of an original self-blocking nut for high temperatures with a thread of 1,25. AANBIEDING: van € 59.50 voor € 39.95
afhalen in de winkel
voor meer informatie: 0224 - 591230

Maak uw keuze