| Frame Sliders Defender for GSX-R '600 '06-
Moet aan 1 kant een gat geboord worden in de kuip.
AANBIEDING; van € 65,00 voor € 39,95
[DEF0306]
MAXIMUM LIGHTNESS: thanks to the innovative raw materials wrought by numerical control machines.
MAXIMUM SAFETY: the plug obtained from a single block of special plastic with low friction coefficient allows the motorbike to stop gradually during the fall reducing the risk of a roll over. All the fixing bolts are made of high-tensile steel.
MAXIMUM SAVING: in case of fall You will only need to replace the plastic plug. With a very low cost Your frame slider will be as new.
INNOVATIVE AESTHETIC QUALITY: we have studied a new design that matches the frame sliders with the line of the new motorbikes, sports and naked ones. In addition each part has been treated with an anodizing process which prevents the attack of atmospheric agents, preserving them forever as if they were new. The plug has been screen printed by laser.
SCREW PREVENTION SYSTEM: the only ones that have a system which prevents the loss of the plug during the driving.
MAXIMUM DISASSEMBLY PRACTICALNESS: it is sufficient to screw the plug with Your bare hands, without using utensils.
ATTENTION: FOR THE ASSEMBLING OF DEFENDER SLIDERS YOU HAVE TO PRACTICE A HOLE ON LEFT FAIRING.
ASSEMBLING INSTRUCTIONS:
Right side:
- unscrew and remove the bolt that fastens frame and engine. This bolt is visible from an air intake on the fairing, so You don't need to dismantle it,
- unscrew derlyn plug from shorter slider and, by using a 8mm allen key, fix the slider and the new bolt in place of the old bolt,
- we suggest to tighten the bolt as the manufacturer says to do,
- put back the derlyn plug on its support.
Left side:
- remove left fairing,
- remove the bolt that fastens frame and engine in the forepart, next to drain manifolds,
- fix longer slider in the same way of left slider,
- modify the fairing as it doesn't hamper frame slider,
- remount modify fairing and put back derlyn plug.
AANBIEDING: van € 47,50 voor € 39.95 |
